Make your linkage connections with ease with the new Nautilus Drydocks Linkage Horn kit.
Each order consists of FOUR linkage horns, created from high-strength sintered nylon. The plastic parts are designed to accept standard 1/8" or 1/16" plated wheel collars (included). Each horn is slotted so that you can choose which side to have the set screw facing, offering maximum versatility for installation.
- 1/8" control horns are approximately 14mm from center of shaft to outermost hole
- 1/16" control horns are approximately 10mm from center of shaft to outermost hole
To use, simply rough up the outside face of the collars with coarse sandpaper and adhere in place with a drop of 2-part epoxy. Slip the horn over your control surface shaft (dive plane, rudder, etc.), and tighten the set screw, locking the horn in place.
Please select your control shaft diameter when ordering, either 1/8" or 1/16".