A revolutionary designed air vacuum pump that converts rotating motion to reciprocating motion without a cam or crank.
 
The motor sequentially compresses two diaphragms in one revolution. A reliable valve seal design ensures air cannot ‘backflow’ through the pump when the motor is switched off.
 
Unlike most 'submarine' pumps, this features an inlet and outlet tube connection
 
 
Control of this pump is easily achieved via our superb 2IS switch unit, which also allows control of a ballast servo from the same channel. 
 
	
Outlet Airflow 0.62l/min
	
Weight 12 gms
	
Rated Voltage DC3-7.2V
	
Max Pressure 60KPa
	
Max Vacuum -10KPa
	
Maximum Current 0.45A
	
43.3×21×12mm
	
Practical ‘in the field testing’ gets 17 psi and -12" vacuum. It will not re-start until the pressure drops to about 10 psi. Draws approx. 0.2 amps at it's maximum.
	
The pump will handle water just as easily as air, so is ideal for a Snort Ballast System.